http://WWW.H9SCREW.COM
RAMKISHANGOPALDASS 58ca6a28bafe5505387f5373 False 38 24
OK
background image not found
Found results for
'consistent holding values'
drop in anchor m 12 INR   7 INR  7
-0%

drop in anchor m 12

Drop-In anchors are female concrete anchors designed for anchoring into concrete. Drop the anchor into the predrilled hole in the concrete. Using a setting tool expands the anchor within the hole in the concrete. USES • RKGD Drop-In anchors should only be used in solid concrete. • Their main use is to insert threaded rod to suspend electrical cable trays, HVAC duct work and fire sprinkler pipe and heads. • They can be used in applications that require a flush mounted anchor and when a bolt needs to be inserted and removed. • A setting tool is required to set the anchor in the concrete. INSTALLATION • As with all female type anchors, the designated diameter of the RKGD Drop-In anchor refers to the side diameter of the anchor. • The outside diameter of the anchor is equal to the hole diameter required to be drilled in the concrete. • Minimum embedment for each diameter of RKGD Drop-In anchor is the length of the anchor. • The RKGD Drop-In Anchor requires the bottom of the hole to set the anchor. • First, drop the anchor in the hole with the threaded open end up towards the surface, then insert proper setting tool and hit with a hammer until the RKGD Drop-In anchor is fully set. HOLDING STRENGTH • The holding values of the RKGD Drop-In anchor are mainly dependent on the psi of the concrete and on the depth of embedment. Other factors include if steel rebar is in the concrete and on the full expansion of the RKGD Drop-In anchor. • The RKGD Drop-In anchor has sides that are smooth to allow for more surface area to be in contact with the concrete, thereby providing consistent holding values..

INR 7 INR 7

Availability:True

Pay mode:COD only

view details
drop in anchor m 10 INR   3.9 INR  3.9
-0%

drop in anchor m 10

Drop-In anchors are female concrete anchors designed for anchoring into concrete. Drop the anchor into the predrilled hole in the concrete. Using a setting tool expands the anchor within the hole in the concrete. USES • RKGD Drop-In anchors should only be used in solid concrete. • Their main use is to insert threaded rod to suspend electrical cable trays, HVAC duct work and fire sprinkler pipe and heads. • They can be used in applications that require a flush mounted anchor and when a bolt needs to be inserted and removed. • A setting tool is required to set the anchor in the concrete. INSTALLATION • As with all female type anchors, the designated diameter of the RKGD Drop-In anchor refers to the side diameter of the anchor. • The outside diameter of the anchor is equal to the hole diameter required to be drilled in the concrete. • Minimum embedment for each diameter of RKGD Drop-In anchor is the length of the anchor. • The RKGD Drop-In Anchor requires the bottom of the hole to set the anchor. • First, drop the anchor in the hole with the threaded open end up towards the surface, then insert proper setting tool and hit with a hammer until the RKGD Drop-In anchor is fully set. HOLDING STRENGTH • The holding values of the RKGD Drop-In anchor are mainly dependent on the psi of the concrete and on the depth of embedment. Other factors include if steel rebar is in the concrete and on the full expansion of the RKGD Drop-In anchor. • The RKGD Drop-In anchor has sides that are smooth to allow for more surface area to be in contact with the concrete, thereby providing consistent holding values..

INR 3.9 INR 3.9

Availability:True

Pay mode:COD only

view details
bullet anchor (drop in anchor) M8 INR   2 INR  2
-0%

bullet anchor (drop in anchor) M8

Drop-In anchors are female concrete anchors designed for anchoring into concrete. Drop the anchor into the predrilled hole in the concrete. Using a setting tool expands the anchor within the hole in the concrete. USES • RKGD Drop-In anchors should only be used in solid concrete. • Their main use is to insert threaded rod to suspend electrical cable trays, HVAC duct work and fire sprinkler pipe and heads. • They can be used in applications that require a flush mounted anchor and when a bolt needs to be inserted and removed. • A setting tool is required to set the anchor in the concrete. INSTALLATION • As with all female type anchors, the designated diameter of the RKGD Drop-In anchor refers to the side diameter of the anchor. • The outside diameter of the anchor is equal to the hole diameter required to be drilled in the concrete. • Minimum embedment for each diameter of RKGD Drop-In anchor is the length of the anchor. • The RKGD Drop-In Anchor requires the bottom of the hole to set the anchor. • First, drop the anchor in the hole with the threaded open end up towards the surface, then insert proper setting tool and hit with a hammer until the RKGD Drop-In anchor is fully set. HOLDING STRENGTH • The holding values of the RKGD Drop-In anchor are mainly dependent on the psi of the concrete and on the depth of embedment. Other factors include if steel rebar is in the concrete and on the full expansion of the RKGD Drop-In anchor. • The RKGD Drop-In anchor has sides that are smooth to allow for more surface area to be in contact with the concrete, thereby providing consistent holding values..

INR 2 INR 2

Availability:False

Pay mode:COD only

view details
DIN 1.2714 DB6 Forging Die Steel INR   156 INR  156
-0%

DIN 1.2714 DB6 Forging Die Steel

Forging Die Steel is nickel hot work tool steel with good hardenability. uniform hardness over section also at great dimensions . Resistance under impact loadings. Very good strength and toughness. Good tempering resistance and dimensional stability. Tools can be water or air cooled. Application Forging tools, dies of all sorts, shapes and sizes, hot forging and pressing tools for steel and metal. Moulds, bushings, piercers etc. Blocks for dies, hammers and pile drivers, rams of power hammers, hot mill rolls, very hard, cold work dies and punches. Properties Physical properties (avarage values) at ambient temperature : Modulus of elasticity [103 x N/mm2]: 215 Density [g/cm3]: 7.84 Thermal conductivity [W/m.K]: 36.0 Electric resistivity [Ohm mm2/m]: 0.30 Specific heat capacity[J/g.K]: 0.46 Workability Forging Hot forming temperature: 1050-850oC. Machinability: The machinability rating of D3 is roughly 25 % that of free machining carbon steel 1018. Due to its abrasion resistant nature, machining in the hardened condition should be limited to finish grinding. DB6 1.2714 Hardened & Tempered 156 – 700 dia mm & square 200 - 600 mm & flat from 300 X 155 – 1000 X 600

INR 156 INR 156

Availability:True

Pay mode:COD only

view details
1
false